The audio distribution amplifier is designed so that the media could pick up the sound from a spokesperson at a podium or any source of line/mic level. This way there is no several microphones sitting in front of him.

» more details

SPECIFICATIONS

Inputs 1) Line · Connector type XLR · Line level (max: +20db) · Impedance 10k ohms · Gain adjustable · Pin 1 Lift 2) Microphones · 2 Connectors type XLR · Switch for 20db PAD · Switch for phantom P.S. (15V) · Gain adjust: 20 to 60 db · Build in compressor / limiter    (adjustable)

Outputs · 8 connectors type XLR · 2 connectors jack 1/4 stereo · 2 connectors jack 1/8 stereo · 2 connectors type RCA · Pin 1 Lift on each output (except RCA) · Impedance 600 ohms Level switch: · line + 4db · micro - 50db Maximum:  · +20 db Headphones:  - adjustable · could be used as an auxiliary output · connector jack 1/4 stereo

Other characteristics :

VU meter analog and digital

Frequency response: 20-20 kHz +/- 1db

Selector for Mic/Line input

All switches recess

Tone oscillator 500HZ (switch ON/OFF) + control level

Dimensions: 15 X 12 X 5(back) X 4(front) 16 gage steel

Weight: 5 LB / 2.5 Kg

International Power supply (90-234v AC)

AC Line input module with fuse

CSA approved